|
Do it yourself
| |||
| ||||
Quick Vehicle Battery Replacement
Model: Volvo Xc90
MK 1
- Years 2002-2014
Turn off the instrument panel and wait about 5 minutes before disconnecting the battery. This allows the airbag sensors to deactivate and enables data storage in the control units.
The battery is located at the bottom of the cargo area. Lift the soundproof panel of the covering to access it. At this point, remove the support brackets by unscrewing two bolts and a nut, and remove the plastic cover protecting the area directly under the mounting support. Now loosen the nuts on the battery cable terminals and pull out the wires. Disconnect the negative terminal first, then the positive. Now remove the battery. Once replaced, before connecting the new battery, turn the key in the ignition to position II, ensuring there are no occupants in the vehicle. Now install the new battery, connecting the positive terminal first, then the negative. Tighten securely. Now install the protective plastic cover and screw in the bolts that will hold the support brackets. Now calibrate the airflow in the dashboard: turn on the ignition, set the air control to maximum speed, then to minimum. Now calibrate the sunroof by opening and closing it.
Updated on 3 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Volvo Xc90
(2002-2014 /
MK 1)
In this tutorial, we can see how to replace the battery in the Volvo XC90, a very simple and quick operation. First of all, make sure that the key is…
Volvo Xc90
(2002-2014 /
MK 1)
Replacing the rear windshield wiper blade is very simple: before proceeding with the replacement, ensure that the new blade is fully compatible in bo…
Volvo Xc90
(2015-2026 /
MK 2)
In this video, you can see where the battery is located in the Volvo XC90 and how to proceed if you need to replace it, a very simple and quick opera…
Other guides you may be interested in
|
How to Replace the Remote Battery for the Volvo XC40?
In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.372
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |