Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Suspension Links

Model: Volvo S70 MK 1 - Years: 1996, 1997, 1998, 1999, 2000
Part: Anti-roll bar

Video tutorial

Damage to the links manifests as pronounced noise over uneven surfaces and can be checked by seeing if the ends of the links have play. Lift the vehicle on a lift and remove the front wheels (it is not necessary to remove the discs and brake calipers).

Unscrew the fixing nuts of the link from both the shock absorber and the anti-roll bar, blocking the link's pin with a hex key. Then, remove the old link and replace it with a new one: to tighten the fixing nuts, always block the pin with the hex key. Finally, reassemble the wheel.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing Front and Rear Brake Discs
Replacing Front and Rear Brake Discs
Volvo S70 (1996-2000 / MK 1) Lift the vehicle on suitable axle stands and remove the wheels. Start with the front brakes by removing the brake caliper, the associated bracket, an…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Volvo S70 (1996-2000 / MK 1) If you notice a bad smell coming from the air vents when the air conditioning is turned on, it is likely time to replace the cabin air filter. The fi…
Instructions for Disassembling Brake Caliper
Instructions for Disassembling Brake Caliper
Volvo S70 (1996-2000 / MK 1) For vehicles that travel on snow-covered roads treated with salt during winter, the oxidation of brake discs and calipers is an inevitable phenomenon…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos