Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Reminder on Volvo S60

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Service warning light

Today we will see how to reset the service light for routine maintenance on the Volvo S60. First, get in the vehicle and press and hold the reset button located at the end of the left lever on the steering wheel; then turn on the ignition by inserting the key, waiting for the maintenance light on the instrument panel to blink three times until you hear a beep, as shown in the video. At this point, turn off the instrument panel and start the engine, thus completing the service reminder reset operation!

Posted on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the Service Light on the Volvo S60
Reset the Service Light on the Volvo S60
Volvo S60 (2010-2018 / MK 2) Here are the instructions to reset the service light for routine maintenance on the Volvo S60. First, get inside the vehicle and turn on the ignition…
How to reset the maintenance light on the Volvo S60
How to reset the maintenance light on the Volvo S60
Volvo S60 (2019-2026 / MK 3) The necessary procedure to successfully complete the manual reset of the maintenance light on your latest model Volvo S60 is very simple, and you can…
How to Reset the Service Light on a Volvo S60
How to Reset the Service Light on a Volvo S60
Volvo S60 (2010-2018 / MK 2) To reset the service light on a Volvo S60, follow the steps shown in the video. First, turn on the ignition and repeatedly press the button next to t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos