Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wishbone on a Volvo S40

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Control arm

Today's guide will illustrate the procedure for removing and replacing the wishbone on a Volvo S40. First, lift the vehicle and start by removing the front wheel; then, unscrew the central nut of the bearing, unscrewing the lower bolt of the wishbone to disconnect the brake system from the driveshaft, as shown in the video. Next, unscrew the rear bolts of the wishbone to remove it; replace it with the new original part, securing it properly. Ensure that the brake system is reassembled correctly.

Posted on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box on a 2007 Volvo S40?
Where is the Fuse Box on a 2007 Volvo S40?
Volvo S40 (2004-2012 / MK 2) To access the fuse box on your Volvo S40, follow the simple procedure described in this guide. First, ensure you park on a flat surface and completel…
Where is the OBD port of the Volvo S40 located?
Where is the OBD port of the Volvo S40 located?
Volvo S40 (1995-2004 / MK 1) To gain free access to the OBD port of your first-generation Volvo S40, simply follow the procedure described in the following guide. First, you need…
Replacement of Wishbone Bushes
Replacement of Wishbone Bushes
Volvo S40 (1995-2004 / MK 1) The deterioration of the rubber bushes in the wishbone suspension (commonly referred to as silent blocks) is a fairly common fault, especially in hea…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos