Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Warning light – error code

In this video tutorial, you will see how to reset the maintenance light on a Volvo V50. When the maintenance light comes on, the first thing to do is change the engine oil and filters. Next, enter the vehicle, engage the handbrake, insert the key, and turn it to position one to power on the instrument cluster without starting the engine. Now, press and hold the button located under the speedometer and turn the key to position two; continue holding the button. At this point, the display will show the message: (Time for regular maintenance) and an "i" light will flash three times. Release the button and remove the key. The next step is to insert the key and start the engine; you should notice that the light has turned off and the reset has been completed.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo V50 (2004-2012 / MK 1) The instructions and steps provided in this guide will allow us to reset the service maintenance light of the Volvo V50. First of all, we get into th…
Volvo V50 (2004-2012 / MK 1) As shown in this tutorial, resetting the service light in the Volvo V50 is a very simple and quick operation. Before proceeding, ensure that all main…
Volvo V50 (2004-2012 / MK 1) In this tutorial we can see how to reset the service in the Volvo V50, an extremely simple and quick operation, to be carried out only once all sched…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos