Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Warning light – error code

This video shows how to reset the maintenance light on the Volvo V40 produced from 2012 to 2019. This procedure is very simple and quick to perform. It is recommended to carry out the reset only after completing the car service. To reset the light, first insert the key, then press the start button once, now press and hold the OK button located on the lever to the left of the steering wheel, while holding it down, press the start button for 2 seconds, continue holding the OK button for about 10 seconds until the 'i' starts flashing. After releasing the OK button, a beep will sound when the reset is complete.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service reminder on the Volvo V40
Resetting the service reminder on the Volvo V40
Volvo V40 (2012-2019 / MK 2) These short and simple steps will show us how to reset the maintenance reminder (service) on the Volvo V40. In order to reset the service, it is nece…
Resetting the service light on the Volvo V40.
Resetting the service light on the Volvo V40.
Volvo V40 (2012-2019 / MK 2) Let's discover the infinite ways to reset the maintenance service light of the engine oil change of the Volvo V40. First of all, let's get into the c…
How to Reset the Tyre Warning Light on the Volvo V40?
How to Reset the Tyre Warning Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial, you will learn how to reset the tyre warning light on the Volvo V40, a very simple and quick operation to perform only after restor…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos