Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the 2024 Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Warning light – error code

Manually resetting the maintenance light that keeps appearing on the instrument cluster display of your new 2024 Volvo XC90 is very simple. Just follow the steps described in this guide. First, get inside the vehicle and turn on the ignition by pressing the appropriate button. At the same time, press and hold the down directional button located on the left side of the steering wheel. Wait for the maintenance light reset process to complete, then release the button. Turn off the ignition, and you are done.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Volvo XC90
How to Reset the Service Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Let's go over the steps to reset the service light for the routine oil change maintenance on the Volvo XC90. First, get inside the vehicle and turn o…
How to Reset the Maintenance Light on the Volvo XC90
How to Reset the Maintenance Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) If the maintenance light on the dashboard of your second-generation Volvo XC90 (2015-2023) comes on and you want to know how to perform the manual re…
How to Reset the Service Light on a Volvo XC90?
How to Reset the Service Light on a Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To reset the Service light on a Volvo XC90, press and hold the button located on the left spoke of the steering wheel while the instrument cluster is…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos