Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. C70
    4. : How to locate the fuse boxes and understand their diagrams in a Volvo C70

Volvo C70 - Video tutorial

Model: Volvo C70 MK 2 - Years 2005-2013
Part: Fuse box
Operation: How to locate the fuse boxes and understand their diagrams in a Volvo C70

In the video in question, it is possible to see how to locate the fuse boxes of a Volvo C70 car and their respective diagrams. The first fuse box shown is located inside the vehicle's cabin, exactly behind the passenger side glove compartment; the box contains fuses assigned to: audio system, bluetooth, navigation, instrument panel, lights, OWS sensor, TCM, ABS, parking assist, cruise control, air conditioning, radio, high beams, low beams, brake lights, seat heating, etc. The fuse box located inside the engine compartment contains fuses assigned to: ABS pump, ABS valve, radiator fan ventilation system, windshield wipers, horn, subwoofer, ECM, TCM, air conditioning compressor, ignition switch, fog lights, oxygen sensor, fuel injectors, etc.


Posted on 7 May 2024 by ScegliAuto

This video is currently unavailable


How to adjust the handbrake on the Volvo C70?
Volvo C70 (2005-2013 / MK 2) In this tutorial, we can see how to adjust the handbrake in the Volvo C70, a very simple and quick operation. First of all, we position the vehicle o
Rear windshield installation
Volvo C70 (2005-2013 / MK 2) If you own a Volvo C70 convertible, you can buy accessories online for a windshield to be installed in the rear to protect the passenger compartment
Head repair instructions
Volvo C70 (2005-2013 / MK 2) If you notice abnormal consumption of coolant with a rise in temperature even to boiling, it is very likely that there may be damage to the cylinder

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos