Do it yourself
Frequently asked questions about cars and motorcycles

How to do the complete service for an Audi E-tron

Model: Audi E Tron MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

Video tutorial

Let's see how to perform a complete service on an electric vehicle like the Audi E-tron: it is very different from a vehicle with an internal combustion engine. We need to check the tires, which on an all-wheel-drive vehicle like this one must have the same level of wear on the same axle.

A difference of more than 3mm can damage the electric differential. Another check to perform is on the brakes: this type of car uses traditional brakes less frequently (thanks to regenerative braking), and the brake discs can rust.

We need to check the suspensions; shock absorbers, silent blocks, and CV joints; we should check for any coolant leaks for the batteries and electric motors: we check the coolant level for the battery and motor; electric motors have a liquid cooling circuit and have drain plugs that need to be opened to ensure there is no liquid accumulation inside the motor, from which air should escape, not liquid.

We check the brake fluid, the cabin filter, the 12-volt battery, and top up the windshield washer fluid.

Essentially, it involves many visual inspections and few concrete tasks.


Posted on 4 December 2025 by ScegliAuto


Related tutorials

Audi E Tron (2018-2023 / MK 1) .. change the battery of the key for the Audi A3 E-tron. Press the metal button located on the side with the "e-tron" inscription and press it to release.. …
Audi E Tron (2018-2023 / MK 1) .. To replace the battery in the Audi E-Tron remote, remove the key from the top of the device to pry it open. This will allow you to detach.. …
Audi E Tron (2009-2025 / ) .. Audi's first Full Electric vehicle: the E-tron. This fully electric SUV features all-wheel drive, allowing it to accelerate from 0 to 60 mph in.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos