Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the windshield washer fluid in the Audi A4?

Model: Audi A4 B9 - Years 2014-2024
Part: Checks and maintenance

In this tutorial, we can see how to top up the windshield washer fluid in the Audi A4, an extremely simple and quick operation. As shown, the fluid reservoir is not located in the typical housing in the engine compartment and therefore may not be visible at first glance. It is actually located behind the right hinge of the hood and is recognizable by the blue color of the cap. To top up the fluid, simply lift the cap and, using a funnel, pour in the necessary amount of fluid to reach the maximum level, which is indicated on the neck of the reservoir itself.

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to top up the windshield washer fluid in the Audi A4
How to top up the windshield washer fluid in the Audi A4
Audi A4 (2014-2024 / B9) Today we will explain how to top up the windshield washer fluid of the 2018 Audi A4. The windshield washer fluid tank, unlike other vehicles, is not …
How to top up the washer fluid on the Audi A4 B8
How to top up the washer fluid on the Audi A4 B8
Audi A4 (2007-2016 / B8) In this video tutorial we will see how to top up the washer fluid on the Audi A4 B8, in the Avant version, but also on most of the manufacturer's mod…
How to top up AdBlue and reset the warning on the Audi A4
How to top up AdBlue and reset the warning on the Audi A4
Audi A4 (2007-2016 / B8) In this guide we will see the information related to topping up the AdBlue fluid and resetting the warning on the Audi A4. First of all, we get on bo…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2007-2016 - Where is the Audi A4 fuel pump relay located? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos