Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Starter motor

In this tutorial we can see how to replace the starter motor in the BMW 3 Series, a simple operation that requires good manual dexterity. First of all, make sure that the key is not inserted and that the engine is completely cold, then open the trunk and disconnect the negative terminal of the battery. Next, open the hood and remove the plastic cover, the filter box, the fuel duct, and finally the exhaust manifold. At this point, we can disconnect the terminals of the starter motor, unscrew the respective fixing bolts, install the replacement and reassemble everything.

Posted on 10 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the starter motor on the BMW 3 Series E46
How to remove the starter motor on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial we will see how to disassemble and replace the starter motor on the BMW 3 Series E46, third series, following the instructions…
Replacing the starter motor on BMW 3
Replacing the starter motor on BMW 3
BMW Serie 3 (1998-2006 / E46) Let's see the replacement of the starter motor of a BMW 3 Series. We lift the front hood and put it in safety. We disassemble the starter motor prote…
Where is the starter motor located in the BMW 3 Series?
Where is the starter motor located in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this video we can see where the starter motor is located in the BMW 3 Series and how to proceed in case we need to replace it. As shown, the start…

Other guides you may be interested in

How to Replace the Rear Door Lock on an Audi A4

First, disconnect the negative cable from the battery. Now, open the door in question and lift the chrome strip at the top. Then, remove all the screws indicated in the video. You can now lift the door panel by pulling it towards you. Disconnect the connectors at the back and remove the panel. Next, you will need to remove the components shown in the video. Also, detach the weatherstrip around the door and the protective sheet. You will also need to remove the window glass by disconnecting all the connectors and bolts. Then, replace the damaged part and retrace the steps described in reverse.

Watch the video!


by ScegliAuto

More videos