Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Battery in a BMW X1?

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

To change the battery in a BMW X1, start by turning off the vehicle and ensuring all lights and electrical systems are off. The battery is located in the engine compartment, usually protected by a cover or shroud. To access it, open the hood and locate the battery compartment.

Remove the cover, if present, to expose the terminals. Begin by disconnecting the negative cable, identifiable by the "-" symbol or black color, followed by the positive, marked with "+" or red. Once disconnected, unscrew the clamps or supports that hold the battery in place and carefully lift it out. Place the new battery in the same housing, ensuring it is securely fastened.

Reconnect the cables in reverse order, starting with the positive and ending with the negative. Finally, check that the terminals are tight and replace the protective cover, if present, before closing the hood.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

BMW X1 (2022-2026 / U11) To change the battery in the key fob of a BMW X1, take the key and press the side button to extract the emergency mechanical key. Using the tip of th…
BMW X1 (2009-2015 / E84) How do you change the key fob battery of a BMW X1? Let's see in this video how to do it in detail. Take your key fob and press the button to remove t…
BMW X1 (2015-2022 / F48) This guide shows you how to disassemble and replace the battery in the electronic key remote for the BMW X1 F48, second generation. Take your remote …

Other guides you may be interested in

    Frequently Asked Questions

    • X1 2015-2022 - Where is the emergency call battery located in the BMW X1? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos