Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the fog light bulb of the BMW 5 Series E60

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Fog lights

To replace the front fog light of the BMW 5 series, we lift the car with a lift to work more easily. We turn the front wheel to free up space, and with an 8 mm socket wrench we unscrew the four screws that secure the lower protection, and remove it. We remove the electrical connector using a T25 torx key, and unscrew the two screws that secure the light, removing it. We remove the bulb and insert it into the new headlight, insert it into its seat and lock it with the two torx screws, insert the connector and put back the protection by locking it with its screws and lower the car.

Posted on 8 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
How to Replace the Position Light Bulbs in the BMW 5 Series?
How to Replace the Position Light Bulbs in the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) In this tutorial, you will see how to replace the position light bulbs in the BMW 5 Series, a very simple and quick operation. Before proceeding, ens…
Where to Find the Fuse Box of the BMW 5 Series E60
Where to Find the Fuse Box of the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) Unlike many other car models, in the BMW 5 Series E60 (2003-2010), the fuse box is not located in the engine compartment or inside the cabin, but in …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos