Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the BMW X1 F48

Model: BMW X1 F48 - Years 2015-2022
Part: Battery

Let's see how to replace the battery of the BMW X1 version F48: we will have to remove from the engine compartment, the air filter cap and then the filter itself. We will have to unscrew the plastic cover located above the battery and positioned at the bottom of the windshield. It will be necessary to also remove the metal safety bar, which crosses the entire front hood, in order to remove the battery, which is located right below, and the safety clips that connect it to the base; of course, first we will have to disconnect the negative pole and then the positive one. Now we can replace the battery with the new one. Reconnect the poles and put back the bar and safety clips. Put back the plastic pieces that were above the battery and reposition the air filter and the cap.

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a BMW X1 F48
How to Replace the Battery in a BMW X1 F48
BMW X1 (2015-2022 / F48) In this video, see how to remove and replace the battery in a BMW X1 F48, second generation, by following these simple and quick steps. First, open t…
Where is the battery located in the BMW X1?
Where is the battery located in the BMW X1?
BMW X1 (2015-2022 / F48) In this video, you can see where the battery is located in the BMW X1 F48 and how to proceed if you need to replace it. As shown, it is positioned in…
Where to Find the OBD Port on the 2019 BMW X1 F48
Where to Find the OBD Port on the 2019 BMW X1 F48
BMW X1 (2015-2022 / F48) This guide will help you easily locate the OBD port on your BMW X1 F48. First, open the driver's side door and enter the cabin, ensuring the car is c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos