Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the ignition button on a BMW X1 Series

Model: BMW X1 E84 - Years 2009-2015
Part: Push button

How to remove the ignition button on a BMW X1 Series? Let's see carefully in this video how to proceed with the correct disassembly. The button to be removed is located to the right of the steering wheel.We continue: we make the va with a screwdriver (we pry between the button and the plastic of the dashboard), turn a little to the right and detach it away from the dashboard (bringing the button towards us), disconnect the power supply terminal. To refit it in the dashboard: insert the car's ignition button above the dashboard compartment, after connecting the power cable. We test the correct functioning of the button.

Posted on 3 October 2019 by ScegliAuto

Video tutorial

Related tutorials

How to top up water on a BMW X1
How to top up water on a BMW X1
BMW X1 (2015-2022 / F48) How to top up water on a BMW X1? Let's see how to proceed. We pull the plastic lever located at the bottom left of the dashboard, lift the front hood…
Removing the washer fluid reservoir on BMW X1 E84
Removing the washer fluid reservoir on BMW X1 E84
BMW X1 (2009-2015 / E84) In today's video we will see how to remove the windshield washer fluid reservoir and its pump on a BMW X1 E84, in simple steps. First of all we lift …
Oil change reset on a BMW X1
Oil change reset on a BMW X1
BMW X1 (2015-2022 / F48) Through this very short video guide, you will be able to see all the necessary steps to reset the oil change indicator on a BMW X1, second generation…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos