|
Do it yourself
| |||
| ||||
How to replace the water pump of the BMW Series 3 320D
Model: BMW Serie 3
E91, E90, E92
- Years 2005-2013
In this guide, we will see the main instructions on how to disassemble and replace the water pump of the BMW Series 3 320D. First, let's open the car's hood and start removing the upper plastic engine cover; then we disconnect the serpentine belt located at the bottom, as shown in the video. At this point, we disconnect the water pump hose, draining the coolant into a container; we unscrew the pump screws to remove it, making the necessary repairs or replacing it with a new original one. All that's left is to reassemble everything!
Posted on 12 January 2026 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 3
(1998-2006 /
E46)
Today we will see how to remove and replace the coolant or antifreeze hose on a BMW 3 Series E46, but also on the 3 Series 320d E90. First of all we …
BMW Serie 3
(2012-2019 /
F31, F30)
Today's main steps will illustrate the procedure for disassembling and replacing the timing chain of the BMW 3 Series 320D. First, we open the hood o…
BMW Serie 3
(1990-2001 /
E36)
Let's see how to remove the water pump on a BMW 3 Series. We lift the car on a column bridge and put it in safety, then, with a screwdriver, unscrew …
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
