|
Do it yourself
| |||
| ||||
How to reset the service light on the BMW Series 3 E90/E91/E92/E93
Model: BMW Serie 3
E91, E90, E92
- Years 2005-2013
Let's see how to reset the service light on BMW Series 3 for the E90/E91/E92/E93 versions. There are two methods, depending on the car's equipment. With the BC (Board Computer) button: turn on the instrument panel; the BC button is the button located at the far left of the turn signal lever: hold it down until the word "test" (or the symbol of a triangle) appears on the display. Release the button: using the same "BC" button, scroll through the menu until you find the desired entry through "oil service"; "inspection"; "brake pads"; "cabin air filter": select the entry you are interested in and press and hold the BC button: you will see an hourglass or a countdown appear. Keep holding until the word "RESET" appears. If the vehicle is equipped with the iDrive system, turn on the ignition, access the iDrive menu, press the "menu" button, and go to "vehicle settings," select the service you want to reset, and you will be asked for confirmation. And that's it.
Posted on 24 January 2026 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 3
(2005-2013 /
E91, E90, E92)
Replacing the front window regulator for BMW E90, E91, E92, and E93 models follows a similar procedure for all these versions of the Anglo-German aut…
BMW Serie 3
(2005-2013 /
E91, E90, E92)
If the trunk of your BMW 3 Series (E90/E91/E92/E93) does not open electrically due to a dead battery or a malfunction, you can manually unlock it fro…
BMW Serie 3
(2005-2013 /
E91, E90, E92)
How do you remove the armrest cover from the interior of a BMW E90, E91, E92, or E93? You need to perform a series of manual operations that involve …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.741
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |