Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Head Gasket

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Engine

This video shows you how to properly install the head gasket on your car. First, obtain the correct replacement part suitable for your engine. Once you remove the cylinder head, you will need to have it machined to ensure the surface adheres properly. The surfaces that will come into contact must be perfectly smooth and clean. To ensure the best adhesion between the two parts, use a gasket sealer before tightening the cylinder head. Finally, remember to tighten the cylinder head bolts to the correct torque specification to avoid breakage or leaks.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Overhaul and Head Gasket Replacement
Engine Overhaul and Head Gasket Replacement
BMW Serie 3 (1990-2001 / E36) This video shows you step by step how to replace the head gasket on your car's engine. First, with the engine disassembled, you need to repair the th…
Head Gasket Installation
Head Gasket Installation
BMW Serie 3 (1990-2001 / E36) If the cylinder head has been removed to replace the head gasket, it may be necessary to re-tap the threaded holes in the cylinder block. Be careful …
Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
BMW Serie 3 (1998-2006 / E46) After machining the cylinder head, check the flatness of the surface using a straightedge and a feeler gauge for valves; repeat the same check on the…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos