Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the BMW 3 Series alternator

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Alternator

In this short and simple guide we will see the main instructions on how to disassemble and replace the BMW 3 Series alternator. First we open the engine hood of our car and start disassembling and removing the air filter box, disconnecting it from the suction hose; then we disconnect the tube located above the alternator, then disconnecting the V-belt, as illustrated in the video. At this point, unscrew the alternator screws and disconnect its electrical wiring to remove it and replace it with the new one; we just have to put it all back together!

Posted on 30 November 2022 by ScegliAuto

Video tutorial

Related tutorials

Alternator belt replacement on BMW 3
Alternator belt replacement on BMW 3
BMW Serie 3 (1998-2006 / E46) Disassembly of the non-working alternator? We see the disassembly and replacement inside the engine compartment of the BMW 3. We open and lift the bo…
Alternator Replacement Instructions
Alternator Replacement Instructions
BMW Serie 3 (1998-2006 / E46) To replace the alternator, first remove the air filter housing (air box) and the cooling fan: you will need a special wrench to loosen the nut securi…
How to Check Your Car's Alternator
How to Check Your Car's Alternator
BMW Serie 3 (1990-2001 / E36) The electricity that comes from the battery is produced by a device that converts the mechanical energy of the engine into electrical energy. This de…

Other guides you may be interested in

How to Remove the Front Door Panel on a Volkswagen Polo

How to remove the driver’s side door panel on a Volkswagen Polo? This video explains the procedure. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to pry off the handle cover (remove the piece), then, with a screwdriver, unscrew the fastening screws in the handle inside the door panel. Unscrew the screws located in the plastic of the door opening lever. Use the lever to detach the retaining clips around the perimeter of the door panel. Finally, grasp the panel with your hands and lever it off the door. Disconnect the cable from the door opening lever and the power connectors for the window switch.

Watch the video!


by ScegliAuto

More videos