Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the BMW 320 E91

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Door trim panel

To remove the door panel, first obtain a plastic trim tool to detach the window switch panel and the molding covering the central section of the panel without damaging them. At this point, you can access the screws securing the panel and then release the clips around the perimeter, being careful not to damage them. Once the panel is removed from the door, disconnect the lock cable and the speaker connector to complete the removal.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel of a BMW 3 Series
How to remove the door panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before starting, we will have to open the door of our BMW 3 Series. Let's start then by going to disengage and remove the inserts of the door panel, …
How to access the fuse box in a BMW 320
How to access the fuse box in a BMW 320
BMW Serie 3 (2005-2013 / E92, E90, E91) The video illustrates how to access the fuse box in a BMW 3 320 series. The procedure is common to E90,91,92,93 series BMWs. Make sure you have the c…
How to remove the door panel of a BMW 3 Series
How to remove the door panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before we can begin, we will have to go to open the front door of our BMW 3 Series. So let's start by disengaging and removing the central insert of …

Other guides you may be interested in

How to Replace the Air Filter on a Ford Fiesta

How to replace the engine air filter on a Ford Fiesta? Follow this guide. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Using a screwdriver, undo the soundproofing panel (where the air filter is located), disconnect the engine air intake hose and the metal clip pin. Remove the panel with the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reassemble the air box panel and tighten the screws. Close the front bonnet.

Watch the video!


by ScegliAuto

More videos