|
Do it yourself
| |||
| ||||
Reset Airbag Light in Your Car
Model: BMW Serie 5
E60, E61
- Years:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Having the airbag warning light constantly on can be annoying and distracting while driving. However, it is usually a minor setting anomaly that can easily occur, especially when performing electrical work on the car, such as installing a car radio. Fortunately, you can resolve this small issue with a few simple steps without needing a professional electrician or a specialized center. First, sit inside your car and turn the ignition key to the 'on' position to activate the instrument cluster without starting the engine. The airbag light will stay on for about 7 seconds before turning off. Immediately after, turn off the instrument cluster by returning the key to the 'off' position. Wait for about 5 seconds, then repeat the previous two steps. Complete the full operation for a third time. At this point, turn the ignition back on, wait for the airbag light to turn off, and start the engine to check if the operation was successful. The airbag light should no longer be on, allowing you to drive without any distractions since the problem will be resolved.
Updated on 22 February 2026 by ScegliAuto
Related tutorials
BMW Serie 5
(2003-2010 /
E60, E61)
Disconnect the SRS/AIRBAG tag and remove the screw underneath; then remove the other two screws along the edge of the panel (one at the bottom and th…
BMW Serie 5
(1995-2003 /
E39)
For minor issues like replacing your car's front headlight, you can try to do it yourself to save some money. The following guide shows you how. Once…
BMW Serie 5
(2003-2010 /
E60, E61)
Follow these steps to reset the airbag light and all engine warning lights on the BMW 5 Series. First, get in the vehicle and connect your diagnostic…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Tyre Pressure Warning Light on a Kia Rio?
The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.132
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |