Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service of a BMW 3 Series E46 version

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Warning light – error code

In this video we can see how to reset the service light on a BMW 3 Series E46 version: get into the car and make sure all doors are closed properly: with the car turned off, press and hold the left button on the instrument panel. Still holding the button, turn the key to position 1; wait about five seconds while still holding the button, until the service message appears. Now release the button and then press it again until the "reset" message flashes. Release the button again and press it quickly as soon as the message reappears during the flashing. Operation completed.

Posted on 28 April 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) In this video we can see how to reset the service of a BMW 3 Series F30 version: Turn on the ignition, then press and hold the button located below t…
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, see how to handle the situation if the brake inspection light does not reset on a BMW 3 Series E90. Even when holding down the button/…
BMW Serie 3 (2019-2026 / G20) If you want to carry out the manual reset procedure of the service indicator light of your BMW 3 Series G20 (2019), then all you have to do is read t…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos