Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil on a Cadillac CTS

Model: Cadillac Cts MK 2 - Years 2008-2014
Part: Engine oil

If you want to change the engine oil filter on this vehicle, proceed as follows, also using the video for guidance. First, lift the car and place it on a lift. Locate the oil drain plug and loosen it, making sure to place a pan on the floor to catch the used oil. Wait a few minutes for all the oil to drain out, then reinstall and tighten the drain plug. Go back to the engine compartment, remove the plastic cover on top, and on the right side of the engine, locate the oil filter cover that you will need to remove with a socket wrench. Remove the old filter and install the new one, making sure to replace the gasket. Reinstall the filter cover and then proceed to add new oil.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2009 Cadillac CTS
How to Reset the Oil Light on a 2009 Cadillac CTS
Cadillac Cts (2008-2014 / MK 2) In this new mini guide dedicated to your 2009 Cadillac CTS (second generation), you will find all the steps to manually reset the engine oil light. F…
How to Reset the Oil Service Light on a Cadillac CTS?
How to Reset the Oil Service Light on a Cadillac CTS?
Cadillac Cts (2008-2014 / MK 2) In this tutorial, see how to reset the oil service light on a Cadillac CTS. Before proceeding, you must complete the oil change and replace the filte…
How to Replace the Air Filter in a Cadillac CTS?
How to Replace the Air Filter in a Cadillac CTS?
Cadillac Cts (2002-2007 / MK 1) In this tutorial, you will see how to replace the air filter in a Cadillac CTS, a very simple and quick operation. First, wait for the engine to cool…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos