Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Chrysler 300

Model: Chrysler 300c MK 2, LD - Years 2011-2023
Part: Service warning light

In this guide, you will learn how to correctly perform the manual reset of the engine oil light on your Chrysler 300 Mk2 (2014 model). First, enter the cabin and take your seat. Then, insert the key and press the ignition button twice consecutively to start the dashboard in diagnostic mode. At this point, press the accelerator pedal fully three times in succession. Finally, turn off the ignition, and the oil light reset procedure is successfully completed. If errors occur, you can repeat the process from the beginning.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Chrysler 300
How to reset the oil light on the Chrysler 300
Chrysler 300c (2011-2023 / MK 2, LD) If you own a second series Chrysler 300 and want to find out the steps you need to take to complete the manual reset procedure of the engine oil ligh…
How to Reset the Oil Light on the Chrysler 300
How to Reset the Oil Light on the Chrysler 300
Chrysler 300c (2011-2023 / MK 2, LD) The procedure to correctly complete the manual reset of the engine oil light on your Chrysler 300 second series (2013-2023) is very simple and is pra…
How to reset the oil light on the Chrysler 300C
How to reset the oil light on the Chrysler 300C
Chrysler 300c (2004-2011 / MK 1) In this new mini guide dedicated to your Chrysler 300C first series (2004-2011), you will discover how to manually reset the engine oil light. First,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos