Do it yourself
Frequently asked questions about cars and motorcycles

What to do if the windshield washer pump is not working on the Citroen C3 MK2.

Model: Citroen C3 SC - Years 2009-2016
Part: Checks and maintenance

In this video we can see a solution to the malfunction of the windshield washer on the Citroen C3 MK2. The first thought that comes to mind is that the problem is the pump that no longer works, but before lifting the car, removing the wheel - remember that the pump is located behind the right front tire - we recommend doing the operation proposed by the youtuber, which is to check the functionality of the dedicated fuse, which is located in the box in the engine compartment, on the right side next to the battery. It is the 10 amp fuse F20. It is worth checking its functionality before changing the pump.

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2009-2016 / SC) In this brief and simple guide, you will learn how to remove and replace the windscreen washer pump on the Citroen C3, following the instructions bel…
Citroen C3 (2002-2009 / FC, FN) Below we will see the instructions that will allow us to disassemble and replace the windshield washer pump of the Citroen C3. First of all, we lift …
Citroen C3 (2002-2009 / FC, FN) Watch this video to see how to remove the windscreen washer pump on a first-generation Citroen C3 in simple steps. First, lift the vehicle on the fro…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2002-2009 - Where is the power steering tank located in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos