Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check and top up fluid levels Citroen Berlingo II 1.6 HDi

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

Let's see in this video how to check and top up the fluid levels on a Berlingo II 1.6 HDi: we open the hood and remove the oil dipstick, wiping it clean. We put it back in place and check it again.

The level should be just below "max." If it is lower, we add oil according to the manufacturer's specifications from the filler cap. We check the level again to ensure it is correct: it should never exceed the maximum. We also check the coolant level: the reservoir is marked, and here too the correct level is just below "max." If it is lower, we add coolant of the same color as that in the reservoir.

The brake fluid reservoir also has level indicators. Theoretically, brake fluid does not get consumed.

If it decreases, it means that the brake pads are wearing down. Therefore, we add some fluid but also consider checking the brakes.

We also add windshield washer fluid: we should never add tap water because the minerals in it could damage the systems and the windshield.


Posted on 29 November 2025 by ScegliAuto


Related tutorials

How to Replace the Radiator Fluid on Citroen Berlingo HDI 1
How to Replace the Radiator Fluid on Citroen Berlingo HDI 1
Citroen Berlingo (1996-2013 / MK 1) In this video, we will see how to bleed and replace the radiator fluid on a first series Citroen Berlingo HDI. First, open the bonnet of the vehicle …
How to replace the turbocharger of the Citroen Berlingo 1.6 HDi
How to replace the turbocharger of the Citroen Berlingo 1.6 HDi
Citroen Berlingo (2008-2018 / MK 2) Below we will see the main instructions that will allow us to disassemble and replace the turbocharger of the Citroen Berlingo 1.6 HDi. First, we ope…
Replacing the Diesel Filter on the Citroen Berlingo 1.6 HDI
Replacing the Diesel Filter on the Citroen Berlingo 1.6 HDI
Citroen Berlingo (2008-2018 / MK 2) Today's guide will show you the steps to remove and replace the diesel filter on the Citroen Berlingo 1.6 HDI. First, open the bonnet of the vehicle …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos