Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Air Conditioning on a Citroen Berlingo?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Air conditioner

If the car air conditioning is not functioning, meaning it does not respond to commands, speed settings, temperature settings, etc., and not due to a broken electrical or electronic component, you can restore it by performing some simple DIY manual operations. The first step is to disconnect the protection fuse inside the fuse box, wait a few minutes, and reconnect it, while the second procedure involves disconnecting the negative terminal of the vehicle's power battery, located in the engine compartment; again, wait a moment and reconnect it.

Posted on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Climate Control Bulbs in the Citroen Berlingo
How to Replace the Climate Control Bulbs in the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Today's steps will show you the procedure for removing and replacing the bulbs of the climate control in the Citroen Berlingo, as well as in the Peug…
How to Replace the Climate Control Bulbs on the Citroen Berlingo 1
How to Replace the Climate Control Bulbs on the Citroen Berlingo 1
Citroen Berlingo (1996-2013 / MK 1) Let’s see in this guide how to dismantle and replace the bulbs for the climate control switches on the dashboard of the first series Citroen Berlingo…
How to Remove the Centre Panel of the Citroën Berlingo Dashboard?
How to Remove the Centre Panel of the Citroën Berlingo Dashboard?
Citroen Berlingo (2008-2018 / MK 2) To replace the centre panel with the climate control buttons on the Citroën Berlingo, disconnect the part located at the base of the leather gear kno…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos