Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : How to replace the battery in the Citroen Xsara Picasso?

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Battery
Operation: How to replace the battery in the Citroen Xsara Picasso?

In this tutorial, we can see how to replace the battery in the Citroen Xsara Picasso, a very simple and quick operation. As shown, the battery is not located in the classic engine compartment, but is instead positioned underneath the driver's seat. To access it, we will need to unscrew the rear bolts of both brackets, in order to lift the seat itself. Once this is done, we can disconnect both terminals, starting with the negative one, remove the battery fixing bar, and extract the battery from its housing. To install the replacement, simply follow the reverse procedure.


Posted on 10 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Xsara Picasso 1999-2012 - Where is the battery located in the Citroen Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - What is the location of the Citroen Xsara Picasso battery? Read Answer
    • Xsara Picasso 1999-2012 - How do you remove the battery cover of the Citroà «n Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - Where is the Citroen Xsara Picasso battery located? Read Answer
    • Xsara Picasso 1999-2012 - Where do the CItroen xsara Picasso battery cables connect? Read Answer
    • Xsara Picasso 1999-2012 - Where is the Citroen Xsara Picasso battery located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos