Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine and Gearbox on a Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Engine

See other generations:
Video tutorial

How to restore the engine parts of your Fiat 500? Let's see how to remove the engine and gearbox in a few essential steps: remove the electrical connections from the alternator, then remove the fuel pipe. Next, detach the coil and accelerator cable using appropriate tools.

Remove the car's transmission: use a socket wrench to unscrew all the bolts present on it. Finally, use a spanner to unscrew the gearbox bolts under the car, and remove the engine from the vehicle using a suitable hoist. Carry out the necessary restoration of the engine and all its parts.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Remove the Gearbox on a Fiat 500
How to Remove the Gearbox on a Fiat 500
Fiat 500 (2007-2021 / 312) In today's tutorial video, we will see how to remove and replace the gearbox and clutch on a Fiat 500 1.2, following the instructions below. First, l…
Guide to Removing the Gearbox of the Fiat 500
Guide to Removing the Gearbox of the Fiat 500
Fiat 500 (2007-2024 / 312) Today's main instructions will show you how to remove and replace the gearbox and clutch of the Fiat 500. First, raise the vehicle and begin by remov…
How to Remove the Gearbox from the Fiat 500?
How to Remove the Gearbox from the Fiat 500?
Fiat 500 (1957-1975 / Epoca) To remove the gearbox from the Fiat 500, open the rear hatch, as the engine is located at the back of this car. Once the rear hatch is open, begin lo…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos