Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the way to reset the Service light in the Fiat Ducato 250?

Model: Fiat Ducato X250 - Years 2006-2014
Part: Service warning light

Before discussing the cancellation of the Service light on the Fiat Ducato 250, let's take a look at what maintenance work is required, following the images in the attached tutorial video. As can be seen, the procedure includes changing the engine oil, the oil filter, and the air filter. However, there are also cases where additional work is required, as specified in the vehicle's user manual, such as changing the timing belt, fuel filter, etc. Now let's move on to turning off the warning light: turn on the instrument panel, press the accelerator pedal and simultaneously press the brake pedal seven times. After doing this, release the aforementioned pedals and turn off the ignition.

Posted on 7 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Ducato 250?
How do you reset the Service light on the Fiat Ducato 250?
Fiat Ducato (2006-2014 / X250) The simple way to reset the Service light in the Fiat Ducato 250 is as follows: turn on the instrument panel, press the accelerator pedal, simultaneo…
How to Reset the Service Light on a 2013 Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will find instructions on how to perform the routine maintenance service and reset the service light on a 2013 Fiat Ducat…
Resetting the service light on a Fiat Ducato
Resetting the service light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today we will explain how to reset the service light on a Fiat Ducato. It is important to remember that this step should only be done after pe…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos