Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Spark plugs

In this video tutorial, you will learn how to remove the spark plugs from a Fiat Punto's engine and replace them with new ones. First, open the bonnet and use a hex key to unscrew the screws of the air filter box to remove the entire piece connected to the throttle body. Next, disconnect the various electrical connectors and proceed to remove all the spark plug leads and caps (do this by hand). Then, unscrew them using a 16 mm socket: unscrew and then finish the operation by hand. Replace all four spark plugs as indicated in the maintenance!

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spark Plugs from a Fiat Punto
How to Remove the Spark Plugs from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the spark plugs from a Fiat Punto? Open the front bonnet and proceed with the spark plug removal. Lift the bonnet and secure it, then r…
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove and replace the glow plugs on a Fiat Grande Punto 1.3 MultiJet engine. First, open the bonnet an…
How to Replace the Spark Plugs on a Fiat Grande Punto?
How to Replace the Spark Plugs on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the spark plugs on a Fiat Grande Punto, open the bonnet to detach the plastic cover on top of the engine block. Once the cover is removed,…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos