Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Fiat 600 steering wheel

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Steering wheel

Replacing the steering wheel of a car that does not have an airbag inside it is quite simple. Today we will show you how to do it on a Fiat 600. Remove the upper casing, perhaps with the help of a lever. Unscrew the now uncovered fixing nut relating to the steering wheel hub. Disconnect the horn connectors and remove the steering wheel. When you go to fit the new steering wheel you will probably have to adapt it a bit, so mount the hub suitable for the new part and screw in the appropriate nut. Connect the horn and secure the steering wheel by putting the screws that should come with the purchase.

Posted on 31 December 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel of a Fiat 600
How to remove the steering wheel of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before we can start, we will have to go and sit on the driver's seat of our Fiat 600. So let's start by disengaging and removing the side covers of t…
How to remove the headrest of a Fiat 600
How to remove the headrest of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before we can start we will have to go and sit on the back seat of our Fiat 600. There are small holes in the headrest supports. So let's start by in…
How to disassemble the cables of the coils on Fiat 600
How to disassemble the cables of the coils on Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils of our Fiat 600 damaged and the car does not start? Let's see how they are replaced on a Fiat 600. Pull the engine compartment opening …

Other guides you may be interested in

How to Remove the Spark Plugs from a Volkswagen Up

How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves.

Watch the video!


by ScegliAuto

More videos