Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform maintenance on the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Checks and maintenance

In today's video, we will check the fluid levels in the third series Fiat Panda. First, open the bonnet using the lever located under the dashboard on the driver's side. Next, insert the prop rod and proceed; start from the left by checking the coolant level (usually pink in colour). Then check the windscreen washer fluid level; next, check the engine oil by pulling out the dipstick. Finally, check the brake fluid level. You can then close the bonnet and finish.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Fiat Panda
How to Reset the Maintenance Light on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you can see how to reset the maintenance light on the Fiat Panda by following simple steps: first, perform maintenance on you…
How to perform an oil change on my Fiat Panda?
How to perform an oil change on my Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) If you need to carry out maintenance on your 2004 Fiat Panda independently, this short guide will be useful. First, lift the vehicle and start by rem…
How to reset the service light on the Fiat Panda
How to reset the service light on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The service light reset on a Fiat Panda vehicle can be performed using the OBD port and a diagnostic computer. To perform this type of reset, you wil…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos