Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Qubo
    4. : Where are the fuses located in the Fiat Qubo?

Fiat Qubo - Video tutorial

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Fuse box
Operation: Where are the fuses located in the Fiat Qubo?

Inside the Fiat Qubo, all the fuses are located in the appropriate fuse boxes that are installed in the vehicle: in this case, there are two, one inside the passenger compartment and one inside the engine compartment. The first one is located in the lower left part compared to the steering column and is protected by a specific plastic panel. Inside it, there are fuses for central locking, power windows, parking sensors, etc. The second box is located next to the battery: this contains fuses for the air conditioning, fuel pump, low beam headlights, etc.


Posted on 23 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qubo 2008-2019 - What is the fuse for the cigarette lighter in the Fiat Qubo? Read Answer
    • Qubo 2008-2019 - How much does the car radio fuse cost of a Fiat Qubo? Read Answer
    • Qubo 2008-2019 - Where is the fuse box of the Fiat qubo located? Read Answer
    • Qubo 2008-2019 - Where are the fuses of the Fiat Qubo located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos