Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Engine Oil Warning Light on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

This short guide will show you step-by-step instructions on how to reset the service light for the routine maintenance oil change on a Fiat 500. First, get in the car and turn on the ignition; then press the accelerator pedal three times, followed by turning off the ignition, as shown in the video.

At this point, turn the ignition back on by turning the key to position one; then wait for the service light to reset on the dashboard to complete the reset operation, and then start the engine!


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Fiat 500 (2014-2022 / 500 X) In this video tutorial, learn how to reset the maintenance warning light for the oil change on the Fiat 500 X. First, get inside the vehicle and conn…
Fiat 500 (2014-2022 / 500 X) In this brief video guide, follow the essential steps and tools required for a service on the Fiat 500, including engine oil change, oil filter, and …
Fiat 500 (2007-2024 / 312) When the oil warning light illuminates on a Fiat 500, as with other car models, it means that the engine oil needs to be replaced. Only after this ca…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the coupon expired warning light on the Fiat 500 mean? Read answer
    • 500 2007-2022 - What does the service light indicate in the FIAT 500? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the engine oil light on the Fiat 500? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos