Do it yourself
Frequently asked questions about cars and motorcycles

What Happens and What to Do When Airbags Deploy on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Airbag

See other generations:
Video tutorial

What happens when airbags deploy, and most importantly, what should you do afterwards? The driver and passenger airbags explode, and the seatbelt pre-tensioners also activate. It is recommended to have the work done by professionals; this is not a job you can do yourself if the front airbags and seatbelt pre-tensioners deploy.

Your future safety is at stake; while reinstalling an airbag can be relatively straightforward, realigning the steering wheel so it turns correctly is already a task that is not suitable for everyone. Replacing the passenger airbag is definitely a job for professionals, as the entire dashboard and centre console must be completely removed, along with the side pillars to access the seatbelts.

To remove the lower part of the front pillar, you also need to remove the rear seats, not just the base but also the backrest; then you can remove the rear parts of the pillars and finally access the front ones: essentially, you will have dismantled the entire car.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Fiat 500 (2012-2023 / 500 L) How do you operate the lights on the Fiat 500L? This is shown in a brief video. Specifically, the vehicle in the video is a 2014 model: the multifunc…
Fiat 500 (2020-2026 / 500 E, 332) Before explaining what the fuse box is, it is essential to clarify what fuses are and their purpose. They are electrical components designed to prote…
Fiat 500 (2007-2024 / 312) When the oil warning light illuminates on a Fiat 500, as with other car models, it means that the engine oil needs to be replaced. Only after this ca…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos