Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : 2008-2012 (MK 2)

Ford Escape Years 2008-2012 (MK 2)

Ford Escape (2008-2012 / MK 2)
How to replace the rear headlight bulb on a Ford Escape
To replace the rear headlight bulb on a Ford Escape, open the rear hatch and locate the fasteners of the light assembly. After removing the retaining screws, …Read all…
Posted on 9 August 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to Locate the Fuses in a Ford Escape
To locate the fuses in a second-generation Ford Escape, you need to find the fuse boxes installed in the vehicle. The main fuse box is located in the engine …Read all…
Posted on 15 July 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
Service Reset on a Ford Escape
In today's video, see how to perform the service reset on a second-generation Ford Escape. Start the procedure by turning the ignition of your vehicle to the …Read all…
Posted on 17 March 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to Replace the Tail Light and Third Brake Light on the Ford Escape
In this guide, we will go over the instructions that will allow us to remove and replace the tail light and its bulbs for the Ford Escape. First, let's move to …Read all…
Posted on 30 January 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to disassemble the front door panel of the Ford Escape
In this guide we will see the instructions that will allow us to disassemble the front door panel of the Ford Escape, in simple steps. First, we open the front …Read all…
Posted on 22 September 2025 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to replace the motor resistor of a Ford Escape ventilation system
Replacing the motor resistor of the ventilation system of a Ford Escape requires the use of a Phillips screwdriver, a ratchet with a socket wrench, and a new …Read all…
Posted on 6 September 2025 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to reset the tire pressure warning on the Ford Escape
Today we will discover the instructions that will allow us to reset the tire pressure warning of the Ford Escape; before performing the TPMS sensor reset, it …Read all…
Posted on 24 June 2025 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to set the time on a Ford Escape
In this very useful video, we can see how to set the time on a Ford Escape, a model produced from 2008 to 2012. We start by turning on the ignition of our car …Read all…
Posted on 16 June 2025 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to disassemble the rear door panel of the Ford Escape
Today we will discover the instructions that will allow us to disassemble and remove the rear door panel of the Ford Escape. First, we open the rear door of …Read all…
Posted on 18 May 2025 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to replace the rear headlight bulbs in the Ford Escape?
In this tutorial, we can see how to replace the rear headlight bulbs in the Ford Escape, a very simple and quick operation. First of all, make sure that the …Read all…
Posted on 12 April 2025 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to remove the factory radio of the Ford Escape 2
If you want to disassemble the factory radio inside the cabin of your second-generation Ford Escape on your own, just follow the steps described below. First …Read all…
Posted on 23 March 2025 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
Where is the fuse box of the Ford Escape 2 located?
In this new guide, we will help you easily find the fuse box inside your second edition Ford Escape. First of all, you need to reach the passenger side of the …Read all…
Posted on 16 January 2025 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
Replacement of the heating resistor of a Ford Escape
We can see in this very short tutorial how to replace the cabin fan resistor on a Ford Escape, second generation model produced from 2008 to 2012. First, we …Read all…
Posted on 10 October 2024 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
Resetting the maintenance light on a Ford Escape
In today's video, we will see how to reset the engine oil life indicator on a Ford Escape, second generation model produced from 2008 to 2012. The operation is …Read all…
Posted on 22 May 2024 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to Remove the Fog Light from the Ford Escape
In this video tutorial, you will see the steps to remove and replace the fog light on the Ford Escape, following the instructions below. First, remove the …Read all…
Posted on 19 September 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to Reset the Maintenance Light on a 2010 Ford Escape
If the maintenance light on the instrument panel of your second-generation 2010 Ford Escape stays on, don't worry because you can easily reset it by following …Read all…
Posted on 20 August 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to Replace the Cabin Filter in the Ford Escape
Replacing the cabin filter in the Ford Escape, as shown in this tutorial, is a very simple and quick task. First, open the hood, then locate the clips in front …Read all…
Posted on 18 August 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to Replace the Driver's Window Regulator in a Ford Escape?
In this tutorial, you will see how to replace the driver's window regulator mechanism in a Ford Escape. This is a simple task but requires good manual skills. …Read all…
Posted on 13 August 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
Where is the fuel pump relay located in the Ford Escape?
In this video, you can see where the fuel pump relay is located in the Ford Escape, an element to check if it suddenly stops working and the fuse is in good …Read all…
Posted on 11 August 2026 by ScegliAuto
Ford Escape (2008-2012 / MK 2)
How to Replace the Windshield Washer Reservoir in a Ford Escape?
In this tutorial, you will see how to replace the windshield washer reservoir in a Ford Escape. First, open the hood, then remove the two bolts located on the …Read all…
Posted on 10 August 2026 by ScegliAuto
Dent (1) Car stereo (8) Battery (18) Control arm (1) Spark plugs (1) Body (2) Key (21) Trunk lock (1) Timing belt (2) Onboard computer (4) Checks and maintenance (12) Throttle body (1) Dashboard (1) Brake rotors (1) Rear bench seat (1) Headlight (4) Tail light (7) Fog lights (5) Air filter (4) Cabin air filter (8) Fuel filter (1) Oil filter (1) Grille (1) Light bulb (3) Headlight bulb (7) Tail light bulb (5) Interior dome light bulb (1) Antifreeze coolant (2) (3) Handle (2) Starter motor (1) Engine oil (5) Clock (9) Door trim panel (12) Front bumper (4) Rear bumper (2) Brake pads (2) Tires (1) Shift knob (1) Fuel pump (5) Car door (2) Instrument cluster (2) Wheel (3) Fuse box (30) Seat (2) Door lock (2) Oxygen sensor (1) Suspension system (1) Side mirror (3) Warning light – error code (14) (4) Tire pressure warning light (4) Service warning light (38) Engine mount (1) Fuel cap (2) Windshield wipers (4) Thermostat (1) Drivetrain (1) Center console tunnel (1) Valve (1) EGR valve (2) Blower motor (2) Side window (1)

See also:

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos