Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in a Ford Transit

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

To reset the service light in a 2020 Ford Transit, insert the key and turn the ignition to the 'on' position without starting the engine. Fully press the brake pedal and the accelerator pedal simultaneously and hold them down.

After a few seconds, a message will appear on the display indicating the start of the maintenance reset procedure. Continue to hold both pedals until the message indicates the operation is complete.

At this point, release the pedals, turn off the ignition, and wait a few seconds. Restart the vehicle to check that the service light has been correctly reset and that no warnings appear on the dashboard display.


Posted on 2 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Ford Transit
How to Reset the Service Light on a Ford Transit
Ford Transit (2006-2014 / MK 7) Let’s see how to reset the service light on a Ford Transit without a display menu. This is the classic Ford system using the pedal combination; press…
How to Reset the Service Light on a Ford Transit
How to Reset the Service Light on a Ford Transit
Ford Transit (2014-2024 / MK 8) Here’s how to reset the service light on a Ford Transit: first, turn on the ignition without starting the engine, then press the accelerator and brak…
How to Reset the Service Light on a Ford Transit
How to Reset the Service Light on a Ford Transit
Ford Transit (2014-2024 / MK 8) To reset the "Service" light on a Ford Transit, start by turning on the ignition. Next, enter the onboard computer using the controls on the steering…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos