Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on a Ford Transit

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: EGR valve

See other generations:
Video tutorial

To replace the EGR valve on a Ford Transit, turn off the engine and wait for it to cool down. Then, open the bonnet and disconnect the negative terminal of the battery.

Remove the engine cover and any intake ducts that obstruct access to the EGR valve, located near the intake manifold. Disconnect the electrical connector or valve control, then free the pipes and fittings connected to the EGR unit.

Unscrew the bolts securing the valve to the manifold and exhaust gas duct and remove it from its seat. Clean the mating surfaces thoroughly, install a new gasket, and position the new EGR valve.

Tighten the fasteners, reconnect the pipes and connectors, and reassemble the components previously removed. Finally, reconnect the battery, start the engine, and check for proper operation.


Posted on 7 September 2026 by ScegliAuto


Related tutorials

How to Replace the EGR Valve on a Ford Transit
How to Replace the EGR Valve on a Ford Transit
Ford Transit (2014-2024 / MK 8) In this guide, you will discover the instructions to remove and replace the EGR valve on a Ford Transit by following these simple steps. First, open …
Replacing EGR Valves on a Ford Transit
Replacing EGR Valves on a Ford Transit
Ford Transit (2006-2014 / MK 7) Remove the engine cover by lifting the bonnet and securing it. Then, using a screwdriver, unscrew the locking pins of the ventilation pipe and remove…
How to remove the EGR valve in the Ford Transit van?
How to remove the EGR valve in the Ford Transit van?
Ford Transit (2006-2014 / MK 7) In this tutorial, you will see how to remove the EGR valve in the Ford Transit van, a very simple and quick operation to clean or replace it directly…

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos