Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Gearbox on Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Transmission

In this video tutorial, follow the main steps and instructions to remove the gearbox from a second-generation Ford Kuga. First, open the bonnet and remove the battery by taking off the cover, along with the entire intake system; then disconnect any electrical connectors. Next, lift the vehicle and disconnect the right front driveshaft to access the gearbox; once the engine oil is drained, unscrew the gearbox bolts to extract it from the vehicle. For further clarification, follow the video to the end!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2008-2012 / C394, MK 1) To work more comfortably, lift your vehicle and place it on suitable axle stands. You can then proceed to remove the plug from the gearbox oil sump. …
Ford Kuga (2012-2019 / C520, MK 2) If you need to reset the automatic gearbox on your vehicle, follow the steps below. First, access the driver's seat, turn on the ignition without sta…
Ford Kuga (2012-2019 / C520, MK 2) Hello, today you will replace the timing belt on your Ford Kuga. First, open the bonnet and remove the air filter assembly along with the engine cove…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos