Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement Instructions

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

Open the bonnet and remove the plastic cover on the engine; disconnect the air mass meter connector, the clamp securing the intake duct, and remove the entire air filter housing. Then, take off the battery cover and proceed to disconnect the negative terminal from the body, the positive terminal from the battery, and complete the disassembly by removing the battery securing bracket to take it out of its place: at this point, you can remove the negative terminal from the battery which should be applied to the new one before inserting it into its place.

Complete the installation by securing the positive terminal, the bracket, and everything previously removed.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing the Car Battery
Replacing the Car Battery
Ford Mondeo / Fusion (1993-2000 / MK 1) If, after charging, there are no positive results, it means the battery needs to be replaced. This operation is quite simple if you follow the correc…
How to Reset the Immobiliser on a Ford Mondeo MK3
How to Reset the Immobiliser on a Ford Mondeo MK3
Ford Mondeo / Fusion (2007-2014 / MK 3) In this video tutorial, you will see the necessary instructions to reset the immobiliser and start the vehicle on the third series Ford Mondeo in sim…
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCI
Guide to Replacing the Timing Belt on the Ford Mondeo 2.0 TDCI
Ford Mondeo / Fusion (2007-2014 / MK 3) Today's instructions will show you the process of removing and replacing the timing belt on the Ford Mondeo 2.0 TDCI. First, open the bonnet and begi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos