Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Door of a Ford Mondeo with a Flat Battery?

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car door

See other generations:
Video tutorial

Before you can start, open the physical key of your Ford Mondeo by pressing the button located on the top section of the electronic key. Next, insert the tip of the physical key into the slot under the smaller section of the outer handle and lever it. This will dislodge and remove the cover of the smaller section of the handle, exposing the lock.

At this point, insert the physical key into the lock and turn it to successfully open the door.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Remove the Battery from a Ford Mondeo
How to Remove the Battery from a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Is the battery on your Ford Mondeo flat and therefore damaged? Here’s how to remove it from the Ford. Open the car door and pull up the engine compar…
When does the immobiliser activate in the Ford Mondeo?
When does the immobiliser activate in the Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) Note that the vehicle in which this video tutorial was made is a Ford Transit, but since the topic concerns various Ford vehicles, including the Ford…
How to Open the Ford Mondeo MK4 with the Remote Key
How to Open the Ford Mondeo MK4 with the Remote Key
Ford Mondeo / Fusion (2014-2021 / MK 4) In this video, learn how to open the fourth generation Ford Mondeo, as well as most models from the manufacturer with the same system, using the mech…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos