Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 8
- Years 2014-2023 In order to reset the Ford Transit Custom Service warning light, you must press and hold the accelerator and brake pedals at the same time, turning the key to turn on the instrument panel. You will have to wait about 20 seconds before releasing the pedals and turning off the ignition. Now, it will be necessary to turn it on again, moving to the menu that will appear on the display using the directional arrows placed on the right spoke of the steering wheel. By selecting the "Maintenance" item it will be possible to check the residual life of the oil, noting that this will have returned to the maximum and therefore the reset will have occurred correctly.
Posted on 9 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |