Do it yourself
| ||||
|
Ford Kuga - Video tutorial
Model: Ford Kuga
MK 2, C520
- Years 2012-2019 Let's make sure that all the doors are closed and that the car radio is off. Now we turn the key to the "on" position to turn on the ignition without starting the engine and, at the same time, keep the brake and accelerator pedals pressed for a minimum of 15 seconds. At this point we will see the service light flash and / or the "service oil reset complete" message appear, informing us that the reset was successful. Release the pedals and turn off the ignition, then wait at least two minutes and turn it on again to check that the procedure has actually been successful.
Posted on 14 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |