Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Service warning light

In this video tutorial, learn how to reset the engine oil maintenance light on a Ford Kuga, model produced from 2012 to 2019. Start by turning on the instrument cluster without starting the vehicle. Press and hold both the brake pedal and the accelerator pedal simultaneously. The reset message will appear; hold the pedals down for about twenty seconds until the reset is complete. Once done, turn off the instrument cluster and turn it back on a few seconds later to check that the maintenance light has been reset correctly.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Ford Kuga?
How to Reset the Service Light in a Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) This tutorial explains how to reset the service light in a Ford Kuga, a very simple and quick operation to perform only after completing all schedule…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) When your Ford Kuga indicates, with the activation of the specific light, that it is time for an oil and filter change, it alerts you to perform the …
How to reset the service light on the Ford Kuga.
How to reset the service light on the Ford Kuga.
Ford Kuga (2012-2019 / C520, MK 2) To reset the service light on a Ford Kuga vehicle, it is important that the necessary maintenance operations have been performed in the workshop for …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos