Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mondeo / Fusion
    4. : Spark plug replacement instructions

Ford Mondeo / Fusion - Video tutorial

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Spark plugs
Operation: Spark plug replacement instructions

First of all it is suggested to carry out this maintenance with a cold engine; once the front hood is opened, the spark plugs are located right at the front of the engine. Then disconnect the sockets connected to the ignition coils, blow compressed air at the spark plug seats to prevent residues of dirt from ending up in the cylinders; unscrew the fixing screws of the ignition coils, and remove them complete with spark plugs; blow again with compressed air and remove the spark plugs; finally insert the new spark plugs without exceeding the tightening torque, insert the pipettes as far as they will go, tighten the relative fixing screws and reconnect the sockets.


Posted on 2 August 2023 by ScegliAuto



Removing the spark plugs on a Ford Mondeo
Ford Mondeo / Fusion (1993-2000 / MK 1) We see in this video the disassembly of the spark plugs on a Ford Mondeo. Let's open the engine compartment, lift the front hood, put it in safety. W
How to remove the spark plugs on Ford Focus
Ford Mondeo / Fusion (2000-2007 / MK 2) How to remove and replace spark plugs on Ford Mondeo? Let's see how to intervene: open the engine compartment and lift the front hood, put it in safe
Ford Mondeo glow plug heating test
Ford Mondeo / Fusion (2000-2007 / MK 2) If there are difficulties in starting the cold engine, it is likely that some glow plugs are not working properly: the glow plug is practically an el

Other guides that may interest you

    Frequently Asked Questions

    • Mondeo 2014-2021 - Where are the spark plugs of the Ford Mondeo located? Read Answer

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos