Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs on the Ford C-MAX?

Model: Ford C Max MK 2 - Years 2010-2019
Part: Fog lights

In this tutorial, you will learn how to replace the fog light bulbs on the Ford C-MAX, a very simple and quick operation. First, ensure the key is not in the ignition for safety. Then, turn the wheel towards the inside on the side you will be working on, and using a Torx T27 spanner, remove the bolts securing the front wing. Once you have access to the back of the fog light, grasp the old bulb, turn it counterclockwise, and pull it out of the housing. Now, connect the replacement bulb and follow the reverse procedure.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Original Headlight Bulbs on Ford C-Max
Replacing Original Headlight Bulbs on Ford C-Max
Ford C Max (2003-2010 / MK 1) Let's see how to replace the original bulbs in the front headlights on a Ford C-Max. Replace the front and rear headlight bulbs if they are damaged. …
Where are the Fuses Located on the Ford C-Max?
Where are the Fuses Located on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) The fuses on the Ford C-Max are divided among three fuse boxes installed in the vehicle: the first is located inside the cabin, under the glove compa…
Replacement of the front headlight bulbs of a Ford C-Max II
Replacement of the front headlight bulbs of a Ford C-Max II
Ford C Max (2010-2019 / MK 2) In this video we see how to change all the front lights bulbs of a Ford C-Max II, so position lights, high beams, low beams and turn signals. The fle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos