Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Ford C Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Tire pressure warning light

If you notice that the low tyre pressure warning light illuminates while driving, check the actual tyre pressures and restore them to the manufacturer's specifications if necessary. Then, reset the low pressure warning light that has illuminated on the dashboard. To do this, refer to the instructions provided below and also check the tutorial video. Use the left and right arrow buttons located on the left side of the steering wheel to scroll through the onboard computer menu until you reach settings. Press the OK button and select the tyre pressure option, then press the OK button again and hold it until the low pressure light turns off.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Ford C-Max
How to Reset the Tyre Pressure Light on the Ford C-Max
Ford C Max (2010-2019 / MK 2) In this video, dedicated to the Ford MPV, the C-Max, you will see how to respond when the message "check tyre pressure" appears on the car's onboard …
How to reset the tyre pressure warning light on a Ford C Max?
How to reset the tyre pressure warning light on a Ford C Max?
Ford C Max (2010-2019 / MK 2) After checking the tyre pressure and replacing any worn tyres, follow the instructions shown in the video to reset the tyre pressure warning light. A…
How do you reset the tire pressure light on the Ford C-Max?
How do you reset the tire pressure light on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) In order to reset the tire pressure warning light of the Ford C-Max, you need to inflate the car's tires to the recommended pressure value: this valu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos