Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Ford Kuga When the Battery is Flat?

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Body

See other generations:
Video tutorial

To open the bonnet of the Ford Kuga when the car battery is flat, detach the cover from the back of the remote control to access the emergency key inside. Once the key is extracted, lift the logo located at the front of the vehicle, just below the bonnet.

At the back of the logo, there will be a lock where you need to insert the key: turning it counterclockwise will unlock the bonnet, allowing you to open it and access the engine compartment.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Open the Ford Kuga Door When the Remote Battery is Flat
How to Open the Ford Kuga Door When the Remote Battery is Flat
Ford Kuga (2012-2019 / MK 2, C520) To open the Ford Kuga door when the remote battery is flat, press the two tabs located on the sides of the remote. By pressing these tabs, you can re…
Emergency Location and Access to the 12V Battery of the Ford Kuga 2022
Emergency Location and Access to the 12V Battery of the Ford Kuga 2022
Ford Kuga (2020-2026 / MK 3) The 12V battery of the Ford Kuga (2022) is not located in the engine bay, but in the boot, under the floor. However, if the battery is completely fla…
How to Replace the Remote Battery for a Ford Kuga
How to Replace the Remote Battery for a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In the video description, you will see how to replace the dead battery in the remote for a Ford Kuga. If possible, simply open the remote casing at t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos