Do it yourself
Frequently asked questions about cars and motorcycles

Reset the Engine Oil Warning Light on a Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Service warning light

Today's instructions will show you how to reset the service warning light for the engine oil change on a Ford Transit. First, get inside the vehicle and turn on the ignition; then press and hold the brake pedal to activate the reset procedure for the service light until it appears on the instrument cluster display. At this point, press and hold the accelerator pedal for ten seconds, completing the reset of the engine oil warning light, which will reset on the instrument cluster!

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2014-2024 / MK 8) To reset the oil warning light after servicing a Ford Transit Courier mk8 (2014-2022) is a very simple and quick operation, as shown in today's tutor…
Ford Transit (2014-2024 / MK 8) To correctly complete the manual reset procedure for the oil light on your Ford Transit latest model (2024), follow the steps outlined in this guide.…
Ford Transit (2014-2024 / MK 8) The procedure to reset the oil light on your 2018 Ford Transit is very simple. Follow this guide to complete it quickly and safely on your own. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos